-
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their ComponentsASTM D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask8. Inoculum Test Organisms8.1 Sources of the Inoculum - The following provides ...
-
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their ComponentsASTM D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask6. Apparatus6.1 Carbon Dioxide Scrubbing Apparatus (see Fig. 1):6.1.1 The following ...
-
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their ComponentsASTM D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask4. Summary of Test Method4.1 Biodegradation of a lubricant or the component(s) ...
-
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components
ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their ComponentsASTM D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask1. Scope1.1 This test method covers the determination of the degree of aerobic ...
-
ASTM D6158 Standard Specification for Mineral Hydraulic Oils
ASTM D6158 Standard Specification for Mineral Hydraulic Oils5. Inspection5.1 Inspection of the material shall be agreed upon between the purchaser and the supplier.6. Packaging and Package Marking6.1 The material shall be suitably packaged to permit acceptance by the carrier and to afford adequate protection ...
-
ASTM D6158 Standard Specification for Mineral Hydraulic Oils
ASTM D6158 Standard Specification for Mineral Hydraulic Oils3. Classification3.1 Type HH Hydraulic Oils - Non-inhibited refined mineral oils for hydraulic systems that do not have specific requirements of oxidation stability, rust protection, or anti-wear properties. Type HH oils are usually intended ...
-
ASTM D6158 Standard Specification for Mineral Hydraulic Oils
ASTM D6158 Standard Specification for Mineral Hydraulic Oils1. Scope1.1 This specification covers mineral oils used in hydraulic systems, where the performance requirements demand fluids with one of the following characteristics:1.1.1 A refined base oil (Class HH),1.1.2 A refined mineral base oil with ...
-
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)11. Report11.1 Report the following information:11.1.1 Grease identity,11.1.2 Test date,11.1.3 Test temperature and duration, and11.1.4 Oil separation, nearest 0.1 %.12. Precision and Bias12.1 Precision - Eight cooperators ...
-
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)9. Procedure9.1 Preheat the oven to test temperature. Unless otherwise specified, the test shall be conducted at standard conditions of 100 +/- 0.5°C for 30 +/- 0.25 h.9.2 Weigh the beaker to within 0.01 g, Wi.9.3 ...
-
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)6. Apparatus6.1 Test Apparatus - The assembled apparatus consists of a cone-shaped sieve constructed of 60-mesh, corrosion -resistant wire cloth, a 200-mL tall-form beaker without spout, and a closely fitting cover ...
