-
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)4. Summary of Test Method4.1 The weighed sample is placed in a cone-shaped, wire-cloth sieve, suspended in a beaker, then heated under static conditions for the specified time and temperature. Unless otherwise required ...
-
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Coni
ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)1. Scope1.1 This test method is used to determine the tendency of lubricating grease to separate oil at an elevated temperature. This test method shall be conducted at 100°C for 30 h unless other conditions are required ...
-
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)9. Report9.1 Report, to the nearest minute, the oxidation induction time (OIT) for the sample.9.2 ...
-
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)8. Procedure8.1 Before starting a test, the control thermocouple calibration shall be conducted at ...
-
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)5. Apparatus5.1 Pressure Differential Scanning Calorimeter (PDSC), equipped with the following items:5.1.1 ...
-
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)3. Summary of Test Method3.1 A small quantity of oil is weighed into a sample pan and placed in a ...
-
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils
ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)1. Scope1.1 This test method covers the determination of oxidation induction time of lubricating ...
-
ASTM D6200 Determination of Cooling Characteristics of Quench Oils
ASTM D6200 Determination of Cooling Characteristics of Quench OilsASTM D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis15. Report15.1 The report shall include cooling time, temperature and cooling rate, and temperature curves for the submitted ...
-
ASTM D6200 Determination of Cooling Characteristics of Quench Oils
ASTM D6200 Determination of Cooling Characteristics of Quench OilsASTM D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis13. Procedure13.1 Place the probe in the preheated furnace. Bring the probe temperature to the required temperature of ...
-
ASTM D6200 Determination of Cooling Characteristics of Quench Oils
ASTM D6200 Determination of Cooling Characteristics of Quench OilsASTM D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis9. Cleaning and Conditioning9.1 Cleaning Used Probes - Wipe probe with a lintless cloth or absorbent paper after removal ...
