Home > Classroom
- ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Satura ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing1. Scope1.1 This test method covers the determination of the weight of wax that has been applied for coating of corrugated board, and the amount of impregnating (saturating) wax in the ...
- ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor H ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids11. Report11.1 TMC and Gear Tooth Condition - Report the total mass change of the gears in milligrams, and the numbers of teeth as determined in 9.9. Note the occurrence of any other surface defects (see Appendix ...
- ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor H ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids9. Procedure9.1 FZG Test Machine Assembly - Assemble the test machine according to the instructions given in Section 3, except employ a modified, low speed drive motor as described in Annex A1.NOTE 1 - In addition ...
- ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor H ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids6. Apparatus6.1 FZG Gear Oil Test Machine - The test machine is described in Annex A1 and illustrated in Fig. A2.1 and Fig. A3.1.6.2 Precision Test Gears - The test gears are standard FZG tooth profile A gears ...
- ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor H ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids4. Summary of Test Method4.1 A modified FZG gear oil test machine is operated for 20 h under controlled conditions of speed (100 r/min), torque (tenth stage), and temperature (121 °C). Test gears are lubricated ...
- ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor H ASTM D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids1. Scope1.1 This test method is used to screen lubricants for gear wear. It is primarily applicable to tractor hydraulic fluids but may be suitable for other applications.1.2 The values stated in SI units are ...
- ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petro ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump14. Report14.1 Report the following information:14.1.1 Mass loss of the ring and vanes in milligrams.14.1.2 Flow rate at start and end of test.14.1.3 Any unusual ...
- ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petro ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump12. Procedure12.1 Pump Cartridge Assembly - (See Fig. 8 and Fig. 7.)NOTE 18 - Assembly is best done by assembling directly into the housing rather than on ...
- ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petro ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump8. Test Stand Maintenance8.1 Sensors and shut-off switches should be checked periodically for proper calibration and operation in accordance with good engineering ...
- ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petro ASTM D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump6. Apparatus6.1 The basic system consists of the following (see Fig. 1):6.1.1 AC Motor, 1200 r/min, or other suitable drive, with 11 kW (15 hp) as suggested ...