-
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Gr
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray10. Procedure10.1 Weigh a clean test panel to the nearest 0.1 g, and record as W1, and then, using the metal jig (as shown in Fig. 2), use a spatula to spread approximately a 0.8 +/- 0.005-mm (1/32 -in.) ...
-
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Gr
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray8. Sampling8.1 Each test will require a quantity sufficient to cover the steel panel (approximately 4 to 12 g).8.2 Supply a 25-g (minimum) representative sample.8.3 Examine for any indication of nonhomogeneity, ...
-
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Gr
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray6. Apparatus6.1 Stainless Steel Test Panel, 18-8 (chromium-nickel) stainless steel, as shown in Fig. 1.6.1.1 Grease Application Jig, for applying grease to panel; Fig. 2.6.2 Water Spray Apparatus, as shown ...
-
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Gr
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray4. Summary of Test Method4.1 The grease to be tested is coated on a stainless steel panel and sprayed with water at the specified test temperature and pressure. The amount of grease remaining on the panel ...
-
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Gr
ASTM D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray1. Scope1.1 This test method covers the ability of a grease to adhere to a metal surface when subjected to a water spray under prescribed laboratory conditions.1.2 The values stated in SI units are to be ...
-
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contaminat
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)9. Report9.1 General Requirements:9.1.1 The report shall provide an adequate description of the sample including the type of fuel, the type of sample container, the source ...
-
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contaminat
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)8. Procedures8.1 Procedure A - Clear, Transparent Containers:8.1.1 Open Glass or Plastic Container:8.1.1.1 Visual Observation - Fill container about three-fourths full. ...
-
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contaminat
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)6. Apparatus6.1 Cylindrical Clear Container, such as:6.1.1 Clear Container, with lid, capable of holding 750 mL (nominal 1 U.S. qt) of fuel and having a diameter of 100 ...
-
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contaminat
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)4. Summary of Test Method4.1 The test method describes two types of sampling containers for evaluating the appearance of aviation fuel samples. Procedure A covers transparent ...
-
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contaminat
ASTM D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)1. Scope1.1 This test method covers two procedures for establishing the presence of suspended free water, solid particulate, and other contaminants in aviation gasoline ...
