-
ASTM D5187 Standard Test Method for Determination of Crystallite Size (Lc) of Ca
ASTM D5187 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction1. Scope1.1 This test method covers the determination of the mean crystallite thickness of a representative, pulverized sample of calcined petroleum coke by interpretation of a X-ray ...
-
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)9. Interpretation of Results9.1 Calculations are not required when prepackaged kits are used.9.2 For Method A, report results as either greater than or less than 1000 mg/kg (ppm).9.3 For Method B, calculate ...
-
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)8. Procedure (Methods A and B)NOTE 2 - Perform the test in a dry area with an ambient temperature greater than 15°C (60°F) and adequate light. In cold weather, a truck cab is sufficient.8.1 Using a volumetric ...
-
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)5. Apparatus5.1 Both the fixed end point test (Method A) and the quantitative test (Method B) are available as completely self-contained test kits containing all the reagents necessary to complete the test.3 ...
-
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)3. Summary of Test Methods3.1 The oil sample (approximately 0.3 g) is dispersed in a hydrocarbon solvent and reacted with a mixture of metallic sodium catalyzed with naphthalene and diglyme at ambient temperature. ...
-
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field
ASTM D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)1. Scope1.1 These test methods cover the determination of chlorine in used oils, fuels, and related materials, including: crankcase, hydraulic, diesel, lubricating and fuel oils, and kerosene, all containing ...
-
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Satura
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing11. Report11.1 Report which facing of the corrugated board was tested and report the completed test on the facing as follows:11.1.1 Impregnated wax in facing, weight percent.11.1.2 Applied ...
-
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Satura
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing9. Procedure9.1 Take each duplicate specimen and separate the coated facing from the combined board as follows:9.1.1 Pry the facing loose from the medium and peel it back to remove it. ...
-
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Satura
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing6. Apparatus6.1 Sample-Trimming Equipment - A suitable trimming board or template arrangement equipped with a razor edge knife for even cutting of specimens to required size, with parallel ...
-
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Satura
ASTM D3522 Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing4. Summary of Test Method4.1 The coated facing is peeled from the medium and then split into two layers, one bearing the coating on waxed fibers and one containing the waxed fibers only. ...
