-
What is Cold Cranking Simulator (CCS)?
What is Cold Cranking Simulator (CCS)? According to wikipedia, the cold-cranking simulator (CCS) is designed and made as a method of determining the low temperature performance of lubricants, in the specific condition of "cold cranking", for instance, starting a cold engine. In this condition, the only ...
-
General instructions to Peak-ABC chromatography data handling system
Simple and versatileThe operating structure of Peak-ABC system is so simple that anyone who knows how to operate a computer would find it easy to learn and use the software to process the analysis results.1. This software is structured in such a way that all the elements of the analysis starting from ...
-
General instructions to Peak-ABC chromatography data handling system
Compliance with GLP and CFR21 Part 11 Standards The reliability of Peak-ABC system is evident from the growing number of happy end-users and OEM partners since we first commercially launched the software in year 2000. Peak-ABC system is designed with the GLP and CFR21 Part 11 standards in mind, so it ...
-
General instructions to Peak-ABC chromatography data handling system
International collaboration Peak-ABC Chromatography Data Handling System is the results of a close collaboration between software development engineers and end-users from China, Germany, USA, Singapore and Taiwan. This software is superior not only because it applies the latest IT technology, but also ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water13. Report13.1 The test report shall contain the following:13.1.1 The type and identification of the product used,13.1.2 The date of the test,13.1.3 A reference to this ASTM-IP standard, indicating whether Procedure A, B, ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water12. Interpretation of Results12.1 Perform all inspections at the end of the test to determine the condition of test rods without magnification under normal light. For the purpose of this test, normal light is considered ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water11. Procedure C for Heavier-Than-Water Fluids11.1 The stirring action provided by the stirrer prescribed in 5.5 is not sufficient to thoroughly mix the water and test sample when the fluid under test is heavier than water. ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water10. Procedure B for Synthetic Sea Water10.1 The procedure for rust-preventing characteristics of inhibited mineral oils in the presence of synthetic sea water shall be identical with that described in 9.1, 9.2, and 9.3, ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water9. Procedure A for Distilled Water9.1 Clean the beaker in accordance with good laboratoryprocedure, wash with distilled water, and dry in an oven. Clean glass beaker cover and a glass stirrer by the same procedure. To clean ...
-
ASTM D665 for rust-preventing characteristics
Rust-preventing characteristics of inhibited mineral oil in the presence of water8. Test Rod and Its Preparation8.1 For each test oil, prepare two steel test rods. These may either be new or from a previous test (see Note 9) and shall be prepared in accordance with 8.2 and 8.3.8.2 The test rod assembly ...
