Rust-preventing characteristics of inhibited mineral oil in the presence of water
13. Report
13.1 The test report shall contain the following:
13.1.1 The type and identification of the product used,
13.1.2 The date of the test,
13.1.3 A reference to this ASTM-IP standard, indicating whether Procedure A, B, or C was used. Since Procedure C may be followed with either distilled water or sea water, be sure to include the type of water used in this case,
13.1.4 The duration of the tests,
13.1.5 Any deviation from the procedure specified, and
13.1.6 The result of the test, including degree of severity of rusting, if desired.
14. Precision and Bias
14.1 No generally accepted method for determining precision or bias is currently available.
15. Keywords
15.1 circulating oils; heavier-than-water fluids; hydraulic oils; inhibited mineral oil; rust-preventing characteristics; steam-turbine oils
