-
ASTM D5901 test method for freezing point of aviation fuels (optical method)
ASTM D5901 test method for freezing point of aviation fuels (optical method)ASTM D5901 standard test method for freezing point of aviation fuels (automated optical method)11. Procedure11.1 Measure out 25 more or less 1 mL of the fuel and transfer it to the clean, dry, test chamber. Support the test chamber ...
-
ASTM D5901 test method for freezing point of aviation fuels (optical method)
ASTM D5901 test method for freezing point of aviation fuels (optical method)ASTM D5901 standard test method for freezing point of aviation fuels (automated optical method)6. Apparatus (see Annex A1)6.1 Automated Apparatus - The apparatus as described in Annex A1 shall consist of a test chamber comprising ...
-
ASTM D5901 test method for freezing point of aviation fuels (optical method)
ASTM D5901 test method for freezing point of aviation fuels (optical method)ASTM D5901 standard test method for freezing point of aviation fuels (automated optical method)4. Summary of Test Method4.1 After insertion of 25 mL of the test specimen into a test chamber, the test specimen is cooled while ...
-
ASTM D5901 test method for freezing point of aviation fuels (optical method)
ASTM D5901 test method for freezing point of aviation fuels (optical method)ASTM D5901 standard test method for freezing point of aviation fuels (automated optical method)1. Scope1.1 This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases9. Report9.1 Report the average of duplicate tests as the percentage weight of grease washed out at the test temperature, and indicate the temperature at which the bearing assembly and grease were dried.10. Precision and Bias10.1 ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases8. Procedure8.1 Pack the tared bearing with 4.00 more or less 0.05 g of test grease. Insert the bearing and tared shields into the housing, and assemble the unit in the test apparatus.8.2 Add a minimum of 750 mL of preheated ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases5. Apparatus5.1 Ball Bearing, ASTM test bearing size 6204 (see ADJD3336).5.2 Bearing Housing and Shield with dimensions as shown in Fig. 1.5.3 Reservoir, Bearing-Housing Mount, Circulating Pump, and Drive Motor, similar or ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases3. Summary of Test Method3.1 The grease is packed into a ball bearing, the bearing is then inserted in a housing with specified clearances, and rotated at 600 more or less 30 rpm. Water, controlled at the specified test temperature, ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases1. Scope1.1 This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79°C (100 and 175°F) under the prescribed laboratory conditions. It is ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating grease10. Calculation and Report10.1 Report the OK and score values in terms of the masses (weights) placed on the mass (weight) pan hanging from the end of the load-lever arm; do not include the mass (weight) of the pan assembly. Report ...
