-
ASTM D4176 method for free water and particulate contamination in distillate fue
ASTM D4176 method for free water and particulate contamination in distillate fuelASTM D4176 standard test method for free water and particulate contamination in distillate fuels (visual inspection procedures)10. Procedure10.1 Procedure 1 - Check visually for evidence of water or particulate contamination. ...
-
ASTM D4176 method for free water and particulate contamination in distillate fue
ASTM D4176 method for free water and particulate contamination in distillate fuelASTM D4176 standard test method for free water and particulate contamination in distillate fuels (visual inspection procedures)7. Apparatus7.1 Cylindrical Container, clear-glass, capable of holding 1.0 more or less 0.1 L ...
-
ASTM D4176 method for free water and particulate contamination in distillate fue
ASTM D4176 method for free water and particulate contamination in distillate fuelASTM D4176 standard test method for free water and particulate contamination in distillate fuels (visual inspection procedures)4. Summary of Test Method4.1 In Procedure 1 approximately 900 mL of fuel is placed into a clear, ...
-
ASTM D4176 method for free water and particulate contamination in distillate fue
ASTM D4176 method for free water and particulate contamination in distillate fuelASTM D4176 standard test method for free water and particulate contamination in distillate fuels (visual inspection procedures)1. Scope1.1 This test method covers two procedures for estimating the presence of suspended free ...
-
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer10. Report10.1 Report the following information:10.1.1 Reference to this test method and the viscometer used,10.1.2 Type and identification of the product under test,10.1.3 Type of cone used,10.1.4 Rate of shear at which the ...
-
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer9. Procedure9.1 With the cone in the down position (in contact with the plate), turn the instrument on and allow it to warm up for at least 5 min. For a multitemperature instrument, set at 25°C or to an alternatively agreed ...
-
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer5. Apparatus5.1 Cone/Plate Type Viscometer, with cone/speed combination producing a rate of shear of 12 000 s(-1). The viscometer must provide a viscosity measurement rage of either 0 to 10 (P) or 0 to 5- (P. With higher viscosity ...
-
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer3. Summary of Test Method3.1 The material to be tested is placed between the cone and plate of a cone/plate viscometer, then subjected to a high shear rate while the viscosity is determined.4. Significance and Use4.1 The viscosity ...
-
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer
ASTM D4287 test method for high-shear viscosity using a cone/plate viscometer1. Scope1.1 This test method covers the determination of the viscosity of paints, varnishes, and related products at a rate of shear of 12 000 s(-1).1.2 Paints and varnishes that dry very rapidly may not give reproducible results ...
-
ASTM D5901 test method for freezing point of aviation fuels (optical method)
ASTM D5901 test method for freezing point of aviation fuels (optical method)ASTM D5901 standard test method for freezing point of aviation fuels (automated optical method)12. Report12.1 Report the temperature of crystal disappearance recorded in 11.5 to the nearest 0.1°C as the freezing point, Test ...
