-
ASTM D2500 standard test method for cloud point of petroleum products
ASTM D2500 standard test method for cloud point of petroleum products4. Summary of Test Method4.1 The specimen is cooled at a specified rate and examined periodically. The temperature at which a cloud is first observed at the bottom of the test jar is recorded as the cloud point.5. Significance and Use5.1 ...
-
ASTM D2500 standard test method for cloud point of petroleum products
ASTM D2500 standard test method for cloud point of petroleum products1. Scope1.1 This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49°C.NOTE 1 - The interlaboratory program consisted of petroleum products ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatus16. Report16.1 When using the flash/no flash method, report whether or not the sample flashed at the required flash point and that Test Method A was used.16.2 ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatusTEST METHOD B - FINITE FLASH POINT12. Procedure - Ambient to 110°C (230°F)12.1 Preliminary or Trial Test:12.1.1 Follow steps 10.1-10.5, omitting the barometric ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatusTEST METHOD A - FLASH/NO FLASH10. Procedure - Ambient to 110°C (230°F)10.1 Inspect the inside of the test cup, lid, and shutter mechanism for cleanliness and ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatus6. Apparatus6.1 Test Cup and Cover Assembly - The essential dimensions and requirements of the apparatus are shown in Fig. A1.1 and described in Annex A1.6.2 ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatus4. Summary of Test Methods4.1 By means of a syringe, 2 mL of the sample is introduced through a leakproof entry port into the tightly closed small scale closed-cup ...
-
ASTM D3278 test method for flash point of liquids
ASTM D3278 test method for flash point of liquidsASTM D3278 standard test methods for flash point of liquids by small scale closed-cup apparatus1. Scope1.1 These test methods cover procedures for determining whether a material does or does not flash at a specified temperature or for determining the lowest ...
-
ASTM D3934 for flash/no flash test-equilibrium method by a closed-cup apparatus
ASTM D3934 for flash/no flash test-equilibrium method by a closed-cup apparatus11. Report11.1 Report the following:11.1.1 Whether the product did, or did not, flash at the specified flash point, and11.1.2 The cup used.12. Precision and Bias12.1 Precision:12.1.1 While the precision of this test method ...
-
ASTM D3934 for flash/no flash test-equilibrium method by a closed-cup apparatus
ASTM D3934 for flash/no flash test-equilibrium method by a closed-cup apparatus10. Procedure10.1 Fill the test cup with the appropriate amount of specimen for the cup being used at a temperature that is at least 20°F (10°C) below the specified test temperature, corrected for barometric pressure (Note ...
