-
ASTM D127 Method for Drop Melting Point of Petroleum Wax including Petrolatum
ASTM D127 Method for Drop Melting Point of Petroleum Wax including Petrolatum4. Summary of Test Method4.1 Specimens are deposited on two thermometer bulbs by dipping chilled thermometers into the sample. The thermometers bearing the specimens are placed in test tubes and heated by means of a water bath ...
-
ASTM D127 Method for Drop Melting Point of Petroleum Wax including Petrolatum
ASTM D127 Method for Drop Melting Point of Petroleum Wax including Petrolatum1. Scope1.1 This test method covers the determination of the drop melting point of petroleum wax. It is used primarily for petrolatums and other microcrystalline wax.NOTE 1 - Additional methods used for petroleum waxes are Test ...
-
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)ASTM D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines6. Test Methods6.1 Determine the requirements enumerated in this specification in accordance with the following test methods:NOTE 2 - The appropriateness ...
-
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)ASTM D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines5. Sampling, Containers, and Sample Handling5.1 The reader is strongly advised to review all intended test methods prior to sampling to better ...
-
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)ASTM D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines4. Fuel Methanol (M70-M85) Performance Requirements4.1 Fuel methanol (M70-M85) shall conform to the requirements in Table 1.NOTE 1 - Most of ...
-
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)
ASTM D5797 Standard Specification for Fuel Methanol (M70-M85)ASTM D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines1. Scope1.1 This specification covers a fuel blend, nominally 70 to 85 volume % methanol and 30 to 14 volume % hydrocarbons for use in ground ...
-
How to check if heating plate or power plate of MG-III equipment is broken?
How to check if heating plate or power plate of MG-III equipment is broken?(1) Use bolt-driver to take off wire from this terminal.(2) Take off bolts on front panel of equipment, open the front panel gently. Please do not break the inner wires. Then, you can see this terminal in this red circle. This ...
-
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy24. Precision and Bias24.1 The precision of these test methods as obtained by statistical examination of interlaboratory test results is as follows:24.1.1 Repeatability - The difference between successive test results, obtained ...
-
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray SpectroscopyTEST METHOD C (LOW-LEAD METHOD)17. Apparatus17.1 X-ray Spectrometer, as described in 5.1. See Note 9.18. Reagents and Materials18.1 Reagents are described in Section 6.18.2 Lead (Pb) Solution, Standard (0.500 g Pb/gal) - Dilute ...
-
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D5059 Standard Test Methods for Lead in Gasoline by X-Ray SpectroscopyTEST METHOD B (SCATTERED TUNGSTEN RADIATION)11. Apparatus11.1 X-ray Spectrometer, capable of measuring radiations mentioned in 3.1.2 and of being operated under the following instrumental conditions or others giving equivalent ...
