-
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base Number
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base NumberASTM D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration6. Apparatus6.1 Sampling Syringe, fixed volume of 0.35 mL.6.2 Test Tubes (2), pliable, ...
-
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base Number
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base NumberASTM D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration4. Summary of Test Method4.1 To determine the base number of an oil sample, the ...
-
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base Number
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base NumberASTM D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration1. Scope1.1 This test method covers a procedure for determining the basic constituents ...
-
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine Oils
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine OilsASTM D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping10. Report10.1 Report the result as volatile contaminants content, mass percent ASTM D3607.10.2 Report the time, if any, ...
-
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine Oils
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine OilsASTM D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping8. Procedure8.1 Turn on the heater and thermoregulator of the oil bath and set the bath at 90.0 +/- 0.2°C (Note 1). If a ...
-
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine Oils
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine OilsASTM D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping6. Apparatus6.1 Nitrogen Cylinder, equipped with regulator. (Warning - Using pressurized gas is hazardous.)6.2 Rotameters ...
-
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine Oils
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine OilsASTM D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping4. Summary of Test Method4.1 A known weight of sample is heated to 90°C under a nitrogen flow for 4.5 h, cooled, and reweighed.5. ...
-
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine Oils
ASTM D3607 Test Method for Removing Volatile Contaminants from Used Engine OilsASTM D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping1. Scope1.1 This test method covers a standardized procedure for removing volatile materials such as gasoline and water from ...
-
ASTM D3461 Test Method for Softening Point of Asphalt and Pitch
ASTM D3461 Test Method for Softening Point of Asphalt and PitchASTM D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)11. Report11.1 Report the softening point, as indicated by the digital readout, to the nearest 0.1°C. If converting to degrees Fahrenheit, ...
-
ASTM D3461 Test Method for Softening Point of Asphalt and Pitch
ASTM D3461 Test Method for Softening Point of Asphalt and PitchASTM D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)10. Procedure10.1 The procedure described in this test method for measuring the softening point of asphalts and pitches using a Mettler ...
