-
ASTM D3306 Standard Specification for Glycol Base Engine Coolant
ASTM D3306 Standard Specification for Glycol Base Engine CoolantASTM D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service4. General Requirements4.1 Engine coolant concentrates or prediluted glycol base engine coolants shall be formulated with either ethylene ...
-
ASTM D3306 Standard Specification for Glycol Base Engine Coolant
ASTM D3306 Standard Specification for Glycol Base Engine CoolantASTM D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service1. Scope1.1 This specification covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)11. Report11.1 Report the failure load stage according to the criteria outlined in 10.4.2. If the criteria was not met at the end of load stage 12 then report the failure load stage as greater than 12.12. Precision and Bias12.1 ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)10. Procedure10.1 Prior to starting a test apply load stage 12 to the system for 2 to 3 min without running the motor (Table 1). This is done to ensure all clearances are in the correct working position. Remove all weights before ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)8. Hazards8.1 (Warning - This test method involves the use of highly loaded gears and shafts turning at high speeds. Appropriate precautions must be taken to protect personnel (see Annex A1.2).)9. Preparation of Apparatus9.1 ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)6. Apparatus6.1 FZG Gear Test Rig:6.1.1 A more complete description of the test rig and operating instructions may be found in the instruction manuals available from the manufacturers/suppliers identified in A2.1.2.6.1.2 The ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)4. Summary of Test Method4.1 An FZG Gear Test Machine is operated at constant speed (1450 rpm) for a fixed period (21700 revolutions - approximately 15 min) at successively increasing loads until the failure criteria is reached; ...
-
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182 Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)1. Scope1.1 This test method, the Forschungstelle für Záhnräder und Getriebebau (Research Site for Gears and Transmissions) Visual Method, commonly referred to as the FZG Visual Method, is intended to measure the scuffing ...
-
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base Number
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base NumberASTM D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration9. Precision and Bias9.1 The precision of this test method as determined by the ...
-
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base Number
ASTM D5984 Test Method for Semi-Quantitative Field Test Method for Base NumberASTM D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration8. Procedure8.1 Obtain samples for analysis by this test method in accordance with ...
