-
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip testWARNING - The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method11 Expression of resultsReport the induction period, obtained from 10.1 or 10.2, in hours and rounded to the nearest 0.1 h.If the induction ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method9 Measurement9.1 Set up the apparatus as shown in Figure 1. If commercially available equipment is used, follow the manufacturer's instructions.9.2 ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method7 SamplingUnless otherwise specified, sampling shall be conducted according to EN ISO 3170 or EN ISO 3171 and/or in accordance with the ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method5 Reagents and materialsUse only reagents of analytical grade and distilled or demineralised water.5.1 Ternary solvent mixture, consisting ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method1 ScopeThis European Standard specifies a test method for the determination of the oxidation stability of fuels for diesel engines, by means ...
-
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determinatio
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)11 Expression of resultsThe results for the sum of the contents of Calcium and Magnesium and for the sum of the ...
-
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determinatio
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)9 Sample analysis9.1 Sample preparationThe sample is first homogenized thoroughly by vigorous shaking. Approximately ...
-
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determinatio
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)6 SamplingSamples shall be taken as described in EN ISO 3170 or EN ISO 3171 and/or in accordance with the requirements ...
-
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determinatio
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)4 ChemicalsUnless otherwise stated, only chemicals of recognized analytical quality shall be used.4.1 Paraffin oil, ...
