-
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace All
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear10. Report10.1 Report the materials used for the dowel pin and block and the identification of the lubricant being tested.10.2 Report the number and type of reactions for each run of the series. Table ...
-
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace All
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear9. Procedure9.1 Place a dowel pin in the drill chuck and secure.9.2 Adjust the drill press to run at 1760 rpm.9.3 Adjust the load with the force gage to be 233 +/- 2 N (52.5 +/- 0.5 lbf) which is equivalent ...
-
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace All
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear6. Apparatus6.1 Fluted Ball-End End Mills, two, 12.7 +/- 0.025 mm (0.500 +/- 0.001 in.) in diameter with a 6.35 +/- 0.025-mm (0.250 +/- 0.001-in.) radius tip, finished to 0.203 to 0.406 µm (8 to 16 µin.) ...
-
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace All
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear4. Summary of Test Method4.1 A shaped dowel pin made of the test material is rotated at 1760 rpm under a pressure of 689 MPa (1000 psi) for 1 min in a shaped hole (drilled into a block of the test material) ...
-
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace All
ASTM D3115 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear1. Scope1.1 This test method is used to evaluate for explosive reactivity of various lubricants in the presence of aerospace alloys under high shear conditions.1.2 The values stated in SI units are to ...
-
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils18. Report18.1 Report the results as glycol-base antifreeze in used oil as positive, trace, or negative, Test Methods D2982, Procedure A, or, positive or negative, Test Methods D2982, Procedure B.18.2 When a sample for ...
-
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating OilsPROCEDURE B - USING SHELF REAGENTS14. Apparatus14.1 Test Bottle - A 250-mL stoppered, graduated cylinder, or a 250-mL jar, approximately 57 mm in outside diameter, 127 mm tall, marked at 50-, 100-, and 175-mL volume ...
-
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating OilsPROCEDURE A - USING TABLETS9. Apparatus9.1 Graduated Cylinder, glass-stoppered, 100 mL, with 1-mL graduations (two required).9.2 Tablet Press - See 10.2.10. Reagents and Materials10.1 Acid Solution (12 volume %) - Add ...
-
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils7. Purity of Reagents7.1 Purity of Reagents - Reagent grade chemicals shall be used in all tests. Unless otherwise indicated, it is intended that all reagents shall conform to the specifications of the Committee on Analytical ...
-
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating
ASTM D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils4. Summary of Test Methods4.1 The ethylene glycol is extracted from the sample with an acid solution and oxidized to formaldehyde with periodic acid which is detected colorimetrically with decolorized fuchsin.5. Significance ...