-
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer10. Procedure10.1 Purge and empty the apparatus and draw a sample of the product to be tested as in Section 8.10.2 Carry out the procedures and take the reading as described in Section 9. After each determination, ...
-
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer8. Sampling8.1 Unless otherwise specified, samples of liquid hydrocarbons shall be obtained by the procedures described in Practice D1265. The procedure for sampling for verification of the apparatus and ...
-
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer6. Apparatus6.1 Hydrometers, graduated in density with a range from 500 to 650 kg/m3, or in relative density with a range from 0.500 to 0.650, and conforming to the dimensions in Specification E100.6.1.1 ...
-
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer4. Summary of Test Method4.1 The apparatus is purged with a portion of the sample before filling with the portion to be used for testing. The pressure cylinder is filled to a level at which the enclosed ...
-
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by
ASTM D1657 Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer1. Scope1.1 This test method covers the determination of the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325 kPa ...
-
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Pe
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke13. Report13.1 Report the average of the two determinations to the nearest 0.001 g/cm3. The particle size range must be reported as part of the test results. For example, VBD (-30 + 50 sieve size) = 0.890 g/cm3.14. ...
-
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Pe
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke11. Procedure11.1 Weigh 100.0 +/- 0.1 g of the coke fraction to be tested into a container. Pour the coke slowly and consistently through a funnel into the graduated cylinder. Total transfer time must be 70 to ...
-
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Pe
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke8. Sample Preparation8.1 Use the crushing procedure in 8.2 and subsequent paragraphs so that contributions to VBD from both as-calcined and laboratory-crushed particles (which differ significantly in density) ...
-
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Pe
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke6. Apparatus6.1 Jaw Crusher, laboratory type; jaw opening, approximately 50 by 200 mm; jaws can be set to gaps of approximately 3.2 to 12.7 mm; manganese steel jaw plates.6.2 Roll Crusher, laboratory type; glass ...
-
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Pe
ASTM D4292 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke4. Summary of Test Method4.1 After appropriate crushing of the calcined coke, using both the jaw crusher and roll crusher, the test volume of 100 g is measured after vibration and the bulk density is calculated.5. ...
