-
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test8. Preparation of Apparatus8.1 Cleaning of Parts:8.1.1 General - The preparation of test engine components specific to the John Deere Coolant Cavitation Test are indicated in this section. Use the John Deere publication CTM61 (13MAY93) ...
-
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test6. Apparatus6.1 Test Engine Configuration:6.1.1 Test Engine - The John Deere 6101H is an inline six-cylinder heavy duty diesel engine with 10.1 L of displacement and is turbocharged and aftercooled. The engine has an overhead valve ...
-
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test4. Summary of Test Method4.1 This test engine is a John Deere six-cylinder 10.1 L (6101H). Test operation includes a 19-min engine break-in, a 20-h coolant break-in, and 230-h in five cyclic steps.4.2 Prior to each test, the engine ...
-
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D7583 Standard Test Method for John Deere Coolant Cavitation Test 1. Scope 1.1 This test method is commonly referred to as the John Deere Cavitation Test. The test method defines a heavy-duty diesel engine to evaluate coolant protection as related to cylinder liner pitting caused by cavitation. ...
-
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additi
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates10. Report10.1 Report the volume insolubles in millilitres for the test mixture, the volume insolubles in millilitres for the reference mixture, and the ratio calculated in 9.2.11. ...
-
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additi
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates8. Procedure8.1 Compatibility testing of SCA shall be conducted using a ratio of 60 parts of coolant concentrate to 40 parts of a water-SCA mixture. The level of SCA in the total ...
-
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additi
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates6. Apparatus6.1 Two-pan General Laboratory Balance, 1 to 2-kg capacity.6.2 Centrifuge Tube, 100-mL capacity in accordance with Test Method D1796.6.3 Centrifuge, capable of maintaining ...
-
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additi
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates4. Summary of Test Method4.1 A mixture of engine coolant concentrate and deionized water containing approximately twice the recommended concentration of SCA is heated to 88°C (190°F) ...
-
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additi
ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates1. Scope1.1 This test method covers determination of the compatibility of commercial SCA and commercial ethylene and propylene glycol engine coolant concentrates. This test method ...
-
ASTM D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oi
ASTM D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction13. Report13.1 The test report shall contain at least the following information:13.1.1 A reference to this standard and the procedure (A or B) followed,13.1.2 All details necessary for complete ...
