-
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Meth
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)8. Sampling8.1 Sample in accordance with the procedure for oxidation stability as described in Practice D4057.9. Preparation of Apparatus9.1 Wash the glass sample container with gum solvent until free from gum. Rinse thoroughly ...
-
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Meth
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)6. Apparatus6.1 Oxidation Pressure Vessel, Glass Sample Container and Cover, Accessories, Pressure Gage, and Oxidation Bath, as described in Annex A1.6.2 Thermometer, having a range as shown as follows and conforming to ...
-
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Meth
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)4. Summary of Test Method4.1 The sample is oxidized in a pressure vessel initially filled at 15 to 25°C with oxygen pressure at 690 to 705 kPa and heated at a temperature between 98 and 102°C. The pressure is recorded ...
-
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Meth
ASTM D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)1. Scope1.1 This test method covers the determination of the stability of gasoline in finished form only, under accelerated oxidation conditions.NOTE 1 - Caution: This test method is not intended for determining the stability ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine12. Report12.1 Reporting Test Results - Report forms are shown in Annex A1. Fill out forms in accordance with the formats shown in Annex A7.12.1.1 During the test, if the engine is shut down or operated out of test limits, ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine10. Procedure10.1 Pretest Procedure:10.1.1 Initial Oil Fill for Flush - The initial oil fill is 45.4 L (48 qt) of test oil: 26.5 L (28 qt) for the pan, 3.8 L (4 qt) for the filters, 1.9 L (2 qt) for the engine oil cooler, ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine8. Preparation of Apparatus at Rebuild8.1 Cleaning of Parts:8.1.1 Engine Block - Thoroughly spray the engine with aliphatic naphtha to remove any oil remaining from the previous test and air-dry.8.1.2 Rocker Covers and Oil ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine6. Apparatus6.1 General Description:6.1.1 The test engine is a Mack E7-350 mechanically governed engine, P/N 11GBA77623 (see Annex A5). It is an open-chamber, in-line, six-cylinder, four-stroke, turbocharged, charge air-cooled, ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine4. Summary of Test Method4.1 The test operation involves use of a Mack E7-350 diesel engine with a warm-up, a 2-h flush for each test, and then a constant speed and load conditions that are held for the remainder of the test. ...
-
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D5967 Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine1. Scope1.1 This test method is commonly referred to as the Mack T-8. This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including viscosity increase and soot ...
