-
ASTM D4054 Standard Practice for Evaluating the Compatibility of Additives with
ASTM D4054 Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials3. Summary of Practice3.1 These procedures are laboratory techniques for establishing additive compatibility with commercial aviation turbine fuels, with additives ...
-
ASTM D4054 Standard Practice for Evaluating the Compatibility of Additives with
ASTM D4054 Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials1. Scope1.1 This practice describes procedures required to determine the compatibility of additives proposed for aviation turbine fuels with both standardized fuels ...
-
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures12. Report12.1 Record the flow temperature to the nearest 0.1°C. When determining compliance with aviation fuel specifications, the flow temperature can be reported as the freezing point of the fuel.12.2 Record the no-flow temperature ...
-
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures11. Procedures A and BNOTE 4 - Procedures A and B are identical except that Procedure A uses the 26-µm test filter, while Procedure B uses the 42-µm test filter.11.1 Set the RAMP control to a temperature approximately 5°C ...
-
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures6. Apparatus6.1 A detailed description is given in Annex A1.6.2 The apparatus defined in this test method comprises a cooling/warming cell, a specimen pump, pressure sensor, test filter, syringe, sample filter, and associated ...
-
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures4. Summary of Test Method4.1 A 5-mL specimen of fuel is subjected to a programmed temperature cycle while a pump maintains an oscillating flow at constant rate across a metal mesh test filter. As the temperature falls, separated ...
-
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D4305 Test Method for Filter Flow of Aviation Fuels at Low Temperatures1. Scope1.1 This test method covers the determination of low-temperature flow behavior, through a screen-type test filter, of aviation turbine fuels which can contain separated solids as wax.1.2 Procedure A employs a 26-µm test ...
-
ASTM D4304 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbin
ASTM D4304 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines4. Sampling and Testing4.1 Sampling - Generally, take all oil samples in accordance with Practice D4057.4.2 Use the ASTM and other test methods described in Tables 1 and 2.5. Functional Property Requirements5.1 Mineral ...
-
ASTM D4304 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbin
ASTM D4304 Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines1. Scope1.1 This specification covers mineral oils used in steam and gas turbine lubrication systems where the performance requirements demand a highly refined mineral base oil compounded with rust and oxidation inhibitors ...
-
ASTM D4293 Specification for Phosphate Ester Based Fluids for Turbine Lubricatio
ASTM D4293 Specification for Phosphate Ester Based Fluids for Turbine Lubrication4. Significance and Use4.1 This is a specification to define the requirements of fire resistant fluids for use in turbine lubrication. This specification defines phosphate ester fluids which will give satisfactory lubrication ...