-
AUTO POUR POINT (HERZOG): D5985
AUTO POUR POINT (HERZOG): D5985EXPLANATIONThis test method covers the determination of pour point of petroleum products by an automatic instrument and continuously rotates the test specimen against a suspended detection device during cooling of the test specimen. This test method includes the range of ...
-
POUR POINT OF PETROLEUM PRODUCTS BY ROBOTIC TILT METHOD: D6892
POUR POINT OF PETROLEUM PRODUCTS BY ROBOTIC TILT METHOD: D6892EXPLANATIONThe pour point of a petroleum product is an index of the lowest temperature of its utility for certain applications. Flow characteristics, like pour point, can be critical for the correct operation of lubricating systems, fuel systems, ...
-
AUTO POUR POINT (ISL): D5950
AUTO POUR POINT (ISL): D5950EXPLANATIONThis test method covers the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surface of the test specimen with an optical device. This test method includes the range of ...
-
AUTO POUR POINT (PHASE TECHNOLOGY): D5949
AUTO POUR POINT (PHASE TECHNOLOGY): D5949EXPLANATIONThis test method covers the determination of pour point of petroleum products by an automatic instrument that applies a controlled burst of nitrogen gas onto the specimen surface while the specimen is being cooled and detects movement of the surface ...
-
POUR POINT OF PETROLEUM PRODUCTS BY USING AUTOMATIC AIR PRESSURE METHOD: D6749
POUR POINT OF PETROLEUM PRODUCTS BY USING AUTOMATIC AIR PRESSURE METHOD: D6749EXPLANATIONThe pour point of a petroleum product is an index of the lowest temperature of its utility for certain applications. Flow characteristics, like pour point, can be critical for the correct operation of lubricating ...
-
POUR POINT: D97
POUR POINT: D97(Equivalent Test Methods: IP 15, ISO 3016, DIN 51597, JIS K 2269, and AFNOR T60-105)EXPLANATIONPour point of a petroleum oil is an index of the lowest temperature of its utility for certain applications. The cloud point (Test Method D2500) is usually higher than the pour point.TEST SUMMARYAfter ...
-
POUR POINT OF CRUDE OILS: D5853
POUR POINT OF CRUDE OILS: D5853EXPLANATIONThe pour point of a crude oil is an index of the lowest temperature of handleability for certain applications. The maximum and minimum pour point temperatures provide a temperature window where a crude oil, depending on its thermal history, might appear in the ...
-
PISTON DEPOSITS BY TEOST MHT: D7097
PISTON DEPOSITS BY TEOST MHT: D7097EXPLANATIONThis test method is designed to predict the deposit-forming tendencies of engine oils in the piston ring belt and upper piston crown area. Correlation has been shown between the TEOST MHT procedure and the TU3MH Peugot engine test in deposit formation. Such ...
-
PHOSPHORUS DETERMINATION IN LUBRICATING OILS: D4047
PHOSPHORUS DETERMINATION IN LUBRICATING OILS: D4047(Equivalent Test Methods: IP 149 and ISO 4265)TEST SUMMARYThis test method is applicable in the range 0.005 to 10.0 mass % of phosphorus in unused lubricating oils and additive concentrates. It should be applicable to filtered used oils also; but no ...
-
PHOSPHORUS DETERMINATION IN LUBRICATING OILS: D1091
PHOSPHORUS DETERMINATION IN LUBRICATING OILS: D1091TEST SUMMARYOrganic material in the sample is destroyed and phosphorus in the sample is converted to phosphate ion by oxidation with sulfuric acid+ nitric acid+ hydrogen peroxide. When the phosphorus content is <2 %, the molybdovanado photometric ...
