-
EN 590 Automotive fuels - Diesel - Requirements and test methods
EN 590 Automotive fuels - Diesel - Requirements and test methods5 Requirements and test methods5.1 Dyes and markersThe use of dyes or markers is allowed.5.2 Additives5.2.1 GeneralIn order to improve the performance quality, the use of additives is allowed. Suitable fuel additives without known harmful ...
-
EN 590 Automotive fuels - Diesel - Requirements and test methods
EN 590 Automotive fuels - Diesel - Requirements and test methods3 SamplingSamples shall be taken as described in EN ISO 3170 or EN ISO 3171 and/or in accordance with the requirements of national standards or regulations for the sampling of automotive diesel fuel. The national requirements shall be set ...
-
EN 590 Automotive fuels - Diesel - Requirements and test methods
EN 590 Automotive fuels - Diesel - Requirements and test methods1 ScopeThis European Standard specifies requirements and test methods for marketed and delivered automotive diesel fuel. It is applicable to automotive diesel fuel for use in diesel engine vehicles designed to run on automotive diesel fuel ...
-
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugg
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method12 Expression of resultsReport the temperature read or indicated at the beginning of the last filtration to the nearest 1 °C (see 10.8 and 10.9) as the cold filter plugging point.13 ...
-
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugg
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method10 Procedure10.1 Position the spacer (6.3) in the jacket (6.2). The jacket shall be free from moisture/ice; this shall be checked immediately before the positioning.10.2 Pour the filtered ...
-
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugg
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method7 SamplingUnless otherwise specified in the commodity specification, samples shall be taken as described in EN ISO 3170 or EN ISO 3171, and/or in accordance with the requirements of ...
-
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugg
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method5 Reagents and materials5.1 Hydrocarbon solvents, technical grade, e.g. Heptane.5.2 Light hydrocarbon solvent, technical grade, e.g. Isopentane.5.3 Lintless filter paper, with particle ...
-
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugg
BS EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method1 ScopeThis European Standard specifies a method for the determination of the cold filter plugging point (CFPP) of diesel and domestic heating fuels (see 3.1) using automated test equipment. ...
-
DIN EN 14214 Automotive fuels - Fatty acid methyl esters (FAME) for diesel engin
DIN EN 14214 Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods5 Requirements and test methods5.1 Dyes and markersThe use of dyes or markers is allowed.5.2 AdditivesIn order to improve the performance quality, the use of additives is allowed. Suitable ...
-
DIN EN 14214 Automotive fuels - Fatty acid methyl esters (FAME) for diesel engin
DIN EN 14214 Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods3 SamplingSamples shall be taken as described in EN ISO 3170 or EN ISO 3171 and/or in accordance with the requirements of national standards or regulations for the sampling of automotive ...
