-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine10. Inspection of Engine, Fuel, and Oil10.1 Pre-Test Measurements:10.1.1 Pistons:10.1.1.1 No piston measurements are required.10.1.2 Cylinder Sleeves Inside Diameter Surface Finish - Measure ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine9. Procedure9.1 Pretest Procedure:9.1.1 Initial Oil Fill for Pretest Break-In:9.1.1.1 The initial oil fill is 32.7 kg [72.0 lb] of test oil: 16.4 kg [36.0 lb] for the pan, 3.3 kg [7.2 lb] ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine8. Preparation of Apparatus at Rebuild8.1 Cleaning of Parts:8.1.1 Engine Block - Thoroughly spray the engine with solvent (see 7.4) to remove any oil remaining from the previous test and ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine6. Apparatus6.1 General Description:6.1.1 The test engine is a Mack E-TECH V-MAC III, electronically controlled fuel injection with six electronic unit pumps, P/N 11GBA81025 (Annex A2). ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine4. Summary of Test Method4.1 The test operation involves use of a Mack E-TECH V-MAC III diesel engine with exhaust gas recirculation (EGR). A warm-up and a 1 h break-in are followed by ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine1. Scope1.1 This test method is commonly referred to as the Mack T-10. This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, ...
-
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine13. Test Report13.1 Report Format - For reference oil results, use the standardized report form set available from the ASTM TMC and data dictionary for reporting tests results and for summarizing ...
-
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine12. Calculation or Interpretation of ResultsNOTE 13 - The summary of results and calculations are recorded on the appropriate report form.12.1 Camshaft Lobe Wear - Use a surface roughness ...
-
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine11. ProcedureNOTE 11 - When installing a new engine and cylinder head or both, conduct a break-in procedure, see 11.1.3, before running official 100 h tests. After completing the break-in, ...
-
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine10. Data Acquisition, Reference Oil Application, and Equipment Calibration and Maintenance10.1 Data Acquisition:10.1.1 Computer Data Acquisition - The test stand log operational data using ...
