ASTM D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
10. Report
10.1 The report shall include the following:
10.1.1 Conditions of application and curing of the coating,
10.1.2 The degree of blistering, flaking, cracking or softening of the film, or both (percent of surface area), and
10.1.3 Any deviations from standard procedure such as special temperature or times of thermal exposure.
11. Precision and Bias
11.1 It is not practicable to specify the precision and bias of this test method on thermal shock sensitivity because the results of the test are only intended to give a pass/fail rating.
12. Keywords
12.1 solid film lubricant; thermal shock
